Looking around, I see a lot of problems with starting and idling rough. 90% of the time it's a dirty carb. As soon as I got my Rhino home the first thing I did was remove the carburetor bowl and clean the jets. It's a 30 min process and makes a huge difference. It can easily be done without...
Basically, my rhino was starting fine, then idling very high. Here's what he said was going on: "When you turn on the key, the ISC valve should fully open (that lets air flow around the throttle blade for starting).
I think thats a great start man post up some pictures of the finished product! 2008 Yamaha Rhino 700 efi, 4000 lb warn winch, full windshield, stereo, custom front and rear bumpers, auxillary lights.
rhino 660 wont start 2007 rhino 660 won't start, battery, relay and fuses good,how can you tell if it's your starter or the starter clutch kit before taking it all apart?
My brother and I tore his 2009 Rhino 700 engine apart months ago. The connecting rod lower crankshaft bearing was completely shot. We ordered a complete replacement crankshaft/connecting rod assembly plus new piston rings, engine seals and gaskets. Now it's time to assemble the engine, we...
The red reverse indicator light comes on a few seconds or so after start-up. This is before any shifting is done. It stays on regardless of what position the shifter is moved to. Is this an adjustment problem or is something shorting out? The other lights are working properly.
So the '07 Rhino 660 got a new one-way starter clutch bearing. During reassembly, the spark plug boot cracked and broke. I ran the Rhino for testing purposed by just jamming the spark plug wire against the plug. Ran great that one time. Now it doesn't start. Spark is VERY intermittent and...
Let me preface this post with a little background, I will be as brief as possible to still get the point across. I ordered a machined sheave kit from JBS last spring. I had problems after the initial installation with hitting the rev limiter from a dead stop if I mashed the go pedal, and...
Hey guys I'm new to the forum but I have an 08 Rhino, (all stock) I had to replace the electrical system so I figured I would share some pics and tips if needed! All 3 of the bolts that hold the stator were loose, 1 even rubbed against the stator, wearing it down, so I replaced.
